Bathrooms are a single of the smallest rooms in the property and they are also a single the most pricey to renovate. Bathroom renovation is a job that, if carried out nicely, can add worth to a property and a excellent space complete of design and style and light.
Bathroom design and style
Bathroom design and style is the initial location of your bathroom renovation you require to get ideal. Just replacing the current bathroom with the exact same design and style might not be adequate. The important to excellent bathroom design and style is to design and style it with the persons that are going to use it in thoughts. Nonetheless be confident that your bathroom design and style also has a common use issue as nicely. For instance: If you had been designing a bathroom for households you could nonetheless design and style the bathroom with simple access to the shower and bath. This would make certain that the design and style would also perform for persons with restricted mobility. This indicates if you make a decision to sell your property or if you are renovating for profit your design and style has a wider industry appeal. Wonderful bathroom design and style also makes use of the space nicely, taking into account the light or window space, size of fittings, and drainage possibilities. Draw out a program to scale and ideal down the sizes of your space. Mark the current drainage points and then and water inlet points. Create down a want list of the bathroom fittings to require and want with their sizes. Now marry the two with each other and see what fits. Note: Most bathroom drainage and water inlet points can be moved but this does come at further expense.
If you have decided to do the perform your self or component of the perform it is time to employ a skip bin and pull out the old bathroom. If your property was created pre 1980 you might have fibro bathroom wall linings with asbestos in it and excellent care will require to be taken. You will require some complete physique disposable overalls, eye protection, and excellent dust mask. Verify with your regional constructing authority or council concerning the regulation on bathroom asbestos wall lining removal.
Eliminate anything except the plumbing. If you maintain the bathroom plumbing in location you will not have to turn the water off for the entire property. Also you will require to jack hammer the floor tiles up and the sand and cement bed that they are laid on.
Bathroom Renovation and building
Bathrooms have to be building correctly from the ground up to make certain that the completed job is appropriate and correct. This also guarantees the design and style and appear of the bathroom will have a excellent finish
The Bathroom Renovation Course of action
- Set up water and drainage pipe and electrical wires.
- Set up wall lining and ceiling and then set up the bath hob and bath.
- Waterproof the floor and shower and bath recess.
- Appropriate the fall of the floor with sand and cement prepared for tiling.
- Lay floor and wall tiles and then grout.
- Set up new bathroom vanity, fittings, and taps – set up new electrical.
- Paint ceiling and final clean.
Step a single – Plumbing and electrical
At this point all new plumbing is installed for clean hot and cold water and drainage. Cautious focus requires to be taken when positioning the new plumbing so that the plumbing fittings are appropriate when the tiling is completed. For instance: To centre a fitting in a shower recess you have to take into consideration the thickness of the wall board, tile glue and tile so the fitting will be centred just after the tiles are in location. The exact same applies to installing drainage pipes for a toilet the wall lining and tile thickness have to be taken into account so the pipe is in the appropriate position when the toilet is installed just after tiling. Also rough in the any new electrical wires without having connecting them to the mains energy.
Step 2 – Set up wall and ceiling linings
Set up your 6mm wall lining getting cautious to nail the fibro board each and every 150mm without having nailing into the new pipes and electrical wires. The very best way is to measure and mark the pipe and wire layout onto your new wall board with a pencil as you go. Screw up (or nail) the ceiling lining, plasterboard is the most prevalent. Nonetheless if you are laying your tiles from floor to ceiling do not set up the cornice as this is very best carried out just after tiling. If you are not tiling to the ceiling go ahead and set up the cornice just after the wallboard and ceiling lining have been installed. Also if your bath is not freestanding you can now make up the frame and set up the bath. Make sure the bath is installed appropriately permitting for the thickness of the tiles and glue.Be confident to verify all linings and pipes just before you continue with your bathroom renovation.
Step 3 – Waterproof your bathroom
Waterproof your bathroom floor, shower recess, and about the bath. When waterproofing the floor make certain that the waterproofing comes 100mm up the walls. The shower recess will require to be waterproofed 100mm above the shower rose outlet. Also the bath really should be waterproofed 100mm above the lip of the bath ideal about and to the floor. At the doorway set up a 25 x 25mm aluminum angle glued into location with excellent silicone and waterproof into the lip. Your entire bathroom really should now the tanked, so the all water will only go down a drain. Bathroom waterproofing tip: waterproofing is an simple job but excellent and accuracy is most critical.
Step 4 – Lay in the cement screed for the floor.
Ahead of the floor tiles can laid the floor have to be smooth and relatively flat with a slight fall to the drainage outlet. To do this you have to use sand and cement mix and it is very best to add a waterproofing agent into this as nicely. With a level, set the floor level at the doorway. Use the major aluminum angle as the completed floor level and measure down the thickness of the tile plus 10mm for the glue. Mark ideal about the bathroom with a level and then screed in your sand and cement mix with a 1 to three degree fall to the major of the drain outlet. Take your time and get it ideal with the completed level as smooth as probable. When the sand cement mix has set but is not dry (you can stroll on it but you it is nonetheless a bit soft) rub it more than with a property brick. This will get rid of all the tiny highs and lows and verify with a level as you go. Let the bathroom floor totally dry and then you really should have a excellent surface to tile onto. Tip: the much more perform you place into the floor screed the a lot easier your tiling will be.
Step 5: Tile floor and walls
Lay your tiles on the floor initial and then grout. Then lay your wall tiles creating confident that they are level as you lay. After the bathroom tiles have been reduce and laid, grout all your tiles and then buff the tiles clean.
Step 6: Set up plumbing fitting and fixtures
Set up all your plumbing fittings and taps. Also match all your towel rails and soap holders. Match your new bathroom vanity creating confident it is level and sealed about the major with silicone and also seal about the bath. Tip: make confident they are in the ideal location just before you drill into your tiles.
Step 7: painting, and cleaning – love
Paint your ceiling and do a final clean creating confident anything is fitted appropriately and that there are no leaks in your plumbing. – Appreciate your new bathroom.